COMPANY PAGE

Fast. Simple. Reproducible. The RBG System. With integrated pump or pressure-proof - The new aerosol generators from Palas GmbH meet all requirements For mass flows from 40 mg/h to 800 g/h, the three new aerosol generators RBG professional, RBG basic and RBG solo meet all current requirements in many areas - from research to quality assurance and calibration. The feed for the storage container filled with dust or powder is provided by state-of-the-art stepper motor technology, which ensures precise feeding to the dispersing brush over a wide mass range. The RBG professional is also designed to be pressure-resistant up to 10 bar and is equipped with automatic volume flow control. This ensures high stability of dispersion performance over a wide range of applications, even with fluctuating supply pressure. A pump for supplying carrier air is installed in the RBG solo. This means that the unit can be used anywhere even without a compressed air supply. All models also offer the option of remote control via PC using the Palas® RBGControl software, which is included in the scope of delivery. The new RBG system

DustView II is an easy-to-use, optical laboratory measuring instrument for characterising the dust release of bulk materials. Quick, clear and reproducible. The fine dust measuring instrument for more quality The DustView II from Palas® is an easy-to-use, optical laboratory measuring instrument for characterising the release of dust from bulk materials. Integrated is a touch panel PC with a large display and evaluation software so that you do not need an additional device. The DustView II determines the individual dusting behaviour quickly, clearly and reproducibly. The DustView II is ideally suited for * Quality control * product development of bulk materials, granulates, etc., as well as for * occupational safety and hygiene. Three good reasons for chosing the Dust View II: # The DustView II convinces with its simple and practical handling and integrated evaluation via a touch panel PC with a large display. You do not need another external PC. # With the DustView II you get a fully reproducible, detailed analysis of dust behaviour in accordance with CIPAC MT 171.1. # A fully automatic measuring sequence

The second generation of a dustiness measurement device The handling of powders and bulk materials for transport, transfer or processing often involves clouds of dust. This may result in disadvantages (e.g. increased health risks, operational safety) and dangers (e.g. dust explosion). For these reasons, it is important to know the dustiness of such materials. The fully automated Palas dustiness measurement device DustView II enables a fast and exact measurement of even smallest propensities of a powder to form airborne dust. The material is released from a small container, free falls a defined distance and impacts on the bottom of the device. The first generation of this measurement device has been used for the last 15 years and has now been modernized thoroughly. Now, measurements can be carried out fully automatically within 40 seconds, displayed and compared on a big, colored touch screen. This touch screen with integrated data logger enables easy and intuitive handling by means of the clearly structured graphical

Exact measuring of the dust behaviour of bulk goods During the production, transport and racking of solids, e.g. powders, bulk goods or granulated material, undesired dust is produced. The well-proven dust measuring device DUSTVIEW made by Palas analyses the dust behaviour of bulk goods quickly and reliably. The fully automated device detects the dust formation after the bulk goods’ free fall and bound. The simple solution for exact dust measurements in the product development, process optimisation and quality control, for industrial safety and hygiene.

with digital single signal processing and coincidence correction The welas® digital is a flexible, powerful and economical light-scattering spectrometer system, which determines the particle concentration and the particle size precisely and reliably. Using fibre-optic cables, welas® sensors – equipped with measurement volumes of varying sizes – can be easily attached to the welas® digital 2000 and 3000 and exchanged at will. These sensors make possible a reliable measurement in the concentration range from <1 P/cm3 to 10E6 P/cm3. The sensors are available for measurements in gases as well as in liquids. Temperature range sensors: from -90 °C to +70 °C (standard), optional up to 250°C; (higher upon request) Pressure range sensors: optional up to 10 bar overpressure (higher upon request) The welas® digital is based on the light-scattering analysis of the individual particle. In the new welas® digital, the particular advantages of the well-known and internationally proven welas® system are combined with a new and

Quality is measurable With the modular particle measuring device welas®, we offer an intelligent measuring system which is adjustable according to the individual requirements of the customer. The latest innovation is the welas® 3000 for quasi simultaneous measurements with two sensors at two different measuring points - the optimal and economic solution for special requirements like measurements in explosion hazardous areas, at temperatures of -90° up to 120°C, in over- and underpressure etc. The two sensors are connected to only one light source and only one optical receiver, therefore the measurements are particularly exact and simple. welas® measures with a very high classification precision also in high concentrations and is equipped with a coincidence detection. The patented T-aperture technology allows measurements without border zone error. The system can be used for various applications, e.g. - isotherm particle measurements in the industry - emission/immission measurements -

Practical basic knowledge regarding aerosol technology „Practical basic knowledge regarding aerosol technology“ – the bilingual handbook (German/English) with the basics of the science is now available. On 64 pages, the most important formulas and information on particle measurement technology are communicated compactly and application-orientated: Introduction Particle Technology Physical characteristics of particles Overview: The most important particle characteristics Aerodynamic diameter Particle distance Coagulation Comparison of mass concentration and number concentration On quick feet: Tracer particles Vaporisation time Aerosol generation Aerosols from solids and dust particles Soot particles Aerosols from liquids Particle size and quantity measurement White-light aerosol spectrometer system Dust concentration measurement Defined dilution Calibration Definitions, terms, and explanations for particle measurements Palas® Core Competencies Literature Thanks to its handy format, the